Custom Entertainment Units Sutherland Shire, Built Around Your TV

0485 032 128

An entertainment unit is where the family lands every night, so it should fit the room and hide the mess. Sutherland Shire Cabinets builds custom TV and media units to suit your lounge, from floating wall-hung units and full media walls to low-line consoles and integrated storage, sized to your screen, your components and the exact wall it sits on. We plan cable runs, ventilation for AV gear and power access so the finished wall stays tidy, and we build in 16-18mm board with heat-sealed edges, glued-and-dowelled boxes and quality soft-close hardware. Finishes run from timber veneer and laminate to hand-sprayed two-pac polyurethane, and we are careful with vinyl-wrap near heat-producing equipment. Owner Steve Smith has 12+ years on the tools, a NSW Contractors Licence and $20M public liability, and quotes compliant materials only. To design a media wall around your lounge, call 0485 032 128.

GET A FREE QUOTE

Full Name *

Phone *

Short message about your needs *

I agree to terms & conditions provided by the company. By providing my phone number, I agree to receive text messages from the business.

Sutherland Shire Cabinets

Custom Entertainment Units Sutherland Shire, Designed for Your Lounge

How you watch decides what we build. A floating, wall-hung TV unit keeps the floor clear beneath it, makes cleaning easy and suits a modern lounge or a Cronulla apartment where space is tight. A low-line console with drawers and cupboards gives generous hidden storage under a wall-mounted screen. A full media wall runs floor-to-ceiling, framing the television with display shelving, closed cabinets, a bar or drinks section and sometimes an integrated electric fireplace or a recessed niche for a soundbar. We build open shelving for consoles and speakers, closed cupboards with ventilated backs for AV receivers and modems, drawers for controllers, cables and the endless accessories, and glass-fronted display sections with lighting. For open-plan living we can carry the same finish across a media wall, a room divider and adjoining storage so the whole zone reads as one built piece. Screen size and mounting height are set first, so we plan the unit around the bracket, the viewing height from the lounge and the components you own now plus a little room to grow. Finishes span thermally-fused melamine, high-pressure laminate, natural timber veneer and hand-sprayed two-pac polyurethane, with handleless push-to-open or shadowline profiles for a clean media-wall look, and integrated LED lighting to wash the wall or light display niches. Whatever the format, it is built to your room, not trimmed from a showroom box.

Sutherland Shire Cabinets

Built-In TV Units, Floating Consoles and Full Media Walls

A media unit has a problem a wardrobe does not: heat. Amplifiers, receivers and consoles throw off warmth, and Sydney's climate adds to it, since the Shire sits in a warm-temperate coastal zone with around 1,145.8mm of rain a year on average and humid summers (Bureau of Meteorology, Observatory Hill 1991-2020), so enclosed AV cabinets need to breathe. We ventilate equipment cupboards with cable and airflow gaps, size the openings to your gear, and route power and HDMI runs through the carcass to a tidy exit near the power point so there is no visible spaghetti. This is also where finish choice matters: we are cautious with vinyl-wrapped doors directly above or beside heat-producing equipment, because vinyl wrap can lift at the edges over time with sustained heat, and instead recommend timber veneer, laminate or hand-sprayed two-pac polyurethane where warmth is a factor. Construction is the same standard we hold across the shop: 16-18mm board, HMR where a unit backs onto an external or damp wall, heat-sealed PUR edge-banding, glued-and-dowelled square boxes, Blum or Hettich soft-close on doors and drawers, hinges rated past 100,000 cycles and runners carrying about 40kg. Wall-hung units are fixed into the framing, not the plasterboard, so a heavy screen and gear are safely carried. Much of the Shire's lounge-room stock is post-war brick-veneer built after the Cronulla railway line opened on 16 December 1939 and the suburbs filled out along it, solid but rarely square, so we scribe media walls to the wall and ceiling for a flush, gap-free finish. We install to even reveals within about 2mm.

Sutherland Shire Cabinets

Materials and Finishes That Handle Heat, Cables and Coastal Humidity

A media wall goes wrong when the cabinetmaker ignores the technology, so we plan the screen, the gear, the cables and the lighting as one job. Sutherland Shire Cabinets is Steve Smith, 12+ years on the tools, working from Sutherland across Miranda, Caringbah, Gymea, Kirrawee, Menai and Engadine. The Shire is a settled family market that renovates rather than moves, and across suburbs like Cronulla the median age is 43 with about 57% of homes owner-occupied (ABS 2021 Census), the improve-in-place pattern running through Sylvania, Kareela and the family suburbs, so an entertainment unit here is a considered, long-term fit-out, not a quick buy. Owners want a wall that suits the room, hides the clutter and still works when they upgrade the television in a few years. Steve holds a NSW Contractors Licence and carries $20M public liability insurance, and you deal with him from the first measure to the final adjustment. Where a media wall needs new power points, an aerial relocation or in-wall cabling, we coordinate with your electrician so the joinery and the wiring land together, and we protect the room while we install. Every material we quote is compliant, from laminate and timber to natural stone via licensed stonemasons, porcelain and stainless where a benchtop or hearth is involved, never engineered stone, banned nationally since 1 July 2024. For a family that watches together every night, that local, accountable, tech-aware approach is worth far more than an off-the-shelf cabinet that ignores where the cables go.

Sutherland Shire Cabinets

What Custom Entertainment Units Cost in the Sutherland Shire

Entertainment units span a wide range, because a simple floating console and a full floor-to-ceiling media wall are very different builds, so treat these as indicative figures, confirmed after we measure and you choose a finish. A straightforward floating TV unit or a low-line console in laminate or timber-look, with soft-close drawers and cupboards, generally runs somewhere around $2,000 to $4,500 supplied and installed. A larger media wall with a mix of open shelving, closed ventilated cabinets and display sections typically sits about $4,500 to $8,000. A full floor-to-ceiling feature wall in hand-sprayed two-pac polyurethane, with integrated lighting, glass display doors, a bar section or an electric fireplace surround, usually runs from roughly $8,000 to $15,000 and up. The main drivers are the size of the wall, the finish (laminate is the most economical and two-pac the dearest), and extras like lighting, glass, a stone or timber hearth for a fireplace, and specialty hardware. Cable management and ventilation are built into every unit at no premium; they are just part of doing it properly. We give you an itemised written quote listing board, finish, hardware, lighting and any hearth or bench material so you can scale the project up or down before we cut. Material costs move over time, so the written quote is the figure that holds.

Sutherland Shire Cabinets

The Design, Build and Installation Process, Step by Step

You can absolutely buy a boxed TV unit, since IKEA Tempe is close to the Shire at about 29km and roughly a 30-minute drive, and Bunnings at Caringbah and Kirrawee stocks Kaboodle, so for a plain, standalone unit against a square wall, flat-pack is a fair option and we will say so. Where it falls down is the wall itself and the technology. Flat-pack media units come in fixed module sizes and standard depths, so they rarely fill a wall neatly, leave gaps at the ends, and make no provision for your specific screen bracket, your components or your cable runs. A floor-to-ceiling media wall simply cannot be flat-packed to fit a real room with a particular ceiling height and an out-of-square post-war wall. Distance to Tempe is not the issue, since it is close; the issue is that a boxed unit is a piece of furniture, not a fitted wall, so you assemble it, stand it in the room, and manage the cables yourself. We design around your screen and gear, ventilate the equipment cupboards, route the cabling, scribe the unit to the wall and ceiling, fix it into the framing and warrant the whole thing. For a small bedroom TV stand, flat-pack may be the sensible spend. For the main living room, the wall the family looks at every evening, a custom media unit fits the room, hides the mess and lasts, which a box on standard dimensions cannot.

Sutherland Shire Cabinets

How Long a Custom TV Unit Takes From Measure to Install

A custom TV unit is a short job measured in weeks rather than months, and most of that time is build rather than installation.

From measure to drawings

The room is measured on site, including the wall, the power and data outlets, the skirting and any bulkhead above. Sizes are set around the screen, the components and the seating distance, and the layout is confirmed before anything is cut. Changing a dimension on paper costs nothing; changing it after the sheets are cut costs a sheet.

Build and installation day

The carcasses are built off site, which keeps the mess out of the lounge room. Installation is usually a single day for a floating unit or a console and longer for a full media wall with integrated shelving. Cable routes are cut during the build rather than improvised on the day, and the unit is scribed to the wall so it sits flat against the skirting.

Sutherland Shire Cabinets

Custom Media Wall or Flat-Pack Unit: Which Suits Your Home?

A flat-pack unit from a Sydney showroom and a built-in media wall solve different problems, and the right choice depends on the room more than the budget.

Where a flat-pack unit makes sense

A standard lounge with a square wall, a normal ceiling and no alcove is well served by an off-the-shelf unit. The nearest IKEA stores are at Tempe and Rhodes, roughly a 30 to 40 minute drive north of the Shire depending on traffic, and the trade-off is self-assembly, a fixed module size and a limited finish range.

Where a media wall earns its cost

Alcoves either side of a chimney breast, a wall that is not square, a bulkhead, or a room where the unit has to run wall to wall are all cases a module cannot meet. A built-in unit hides cabling inside the carcass, carries the finish across the whole wall, and is scribed to the room so there is no gap behind it collecting dust.

Sutherland Shire Cabinets

Book a Measure and Quote Anywhere in the Sutherland Shire

A measure and quote is the practical next step for anyone weighing a custom unit, and it is free anywhere across the Shire.

What happens at the measure

The room is measured properly, the screen size and components are noted, and the power and data positions are recorded so the cabinetry can be planned around them rather than cut afterwards. Finishes and layout options are discussed in the room itself, where the light and the existing joinery are visible.

Where the service reaches

Measures are booked across Sutherland, Cronulla, Miranda, Caringbah, Menai, Engadine, Gymea, Kirrawee, Sylvania, Woolooware, Jannali and Kareela. Call 0485 032 128 to arrange a time. A written quote follows the measure, so the figure is based on the actual room rather than an estimate over the phone.

TESTIMONIALS

What Our Entertainment & TV Units Customers Say About Us

The Process

3 Step Process For Your Entertainment & TV Units Needs

1. On-site measure and design

We visit your home anywhere in the Shire and measure the room as it truly is, because the post-war and Federation homes here have settled and are rarely square. We talk through your ideas, layout, materials and budget, then design cabinetry to suit the real space rather than forcing in standard modules. The measure and quote are free and without obligation.

2. Made to your measurements

Your cabinetry is made to the exact measurements of your room, with carcasses glued, dowelled and built square, heat-sealed edge-banding on every exposed edge, and quality soft-close Blum or Hettich hardware. For beach and waterfront homes we specify corrosion-resistant hinges, runners and fixings against the salt air, and 16 to 18mm HMR board in every wet area.

3. Local install and warranty

The same team that made your cabinetry installs it, scribing to your real walls and packing it dead level so reveals sit within about 2mm and doors and drawers line up cleanly. We finish, adjust and clean up, then back the work with a local warranty, a NSW Contractors Licence and $20M public liability cover. Call 0485 032 128 to book your measure.

Entertainment & TV Units In Sylvania Waters

FREQUENTLY ASKED QUESTIONS

Everything you need to know about our Entertainment & TV Units In Sylvania Waters

Can you build a media wall around my existing TV and equipment?

Yes, and we plan the build around exactly what you own. Tell us your screen size and bracket, your components such as receiver, console, soundbar and modem, and how you like to sit, and we design the unit around the viewing height and the gear, with ventilated cupboards and cable runs sized to suit. We also leave a little room to grow so a future screen or an extra component still fits without a rebuild.

How do you hide the cables and power?

We route power, HDMI and speaker cables through the carcass to a tidy exit near your power point, and ventilate the equipment cupboard so enclosed gear stays cool and reachable. Where you want a wall-mounted screen with nothing visible, we coordinate with your electrician to bring power and an aerial or data point out behind the unit. The result is a clean wall with no visible cable spaghetti and easy access when you need it.

Will an enclosed cabinet overheat my AV equipment?

Not if it is built properly. Amplifiers and receivers throw off heat, so we ventilate equipment cupboards with airflow and cable gaps sized to your gear, and never seal AV components into an airtight box. We also avoid vinyl-wrapped doors right beside heat sources, since vinyl wrap can lift at the edges over time with sustained warmth, and use timber veneer, laminate or two-pac polyurethane there instead. Your gear breathes and stays accessible.

Can you include a fireplace, bar or display lighting in the unit?

Yes. Media walls often combine a television with an electric fireplace surround, a drinks or bar section, glass-fronted display cabinets and integrated LED lighting to wash the wall or light niches. We build the surround for your chosen electric fireplace, and can incorporate a stone, porcelain or timber hearth or bench, never engineered stone, which is banned. Lighting is wired in with your electrician so it is switched cleanly and looks built-in.

How is a wall-hung unit fixed so it holds the weight?

Wall-hung TV units and floating consoles are fixed into the wall framing, not just the plasterboard, so they safely carry the cabinet, the screen bracket and the gear inside. We locate the studs, use appropriate structural fixings, and build the carcass square in 16-18mm board so it does not rack. On brick or masonry walls we fix accordingly. A properly hung unit feels rock-solid and keeps the floor clear beneath it.

Can you match the unit to my flooring and other cabinets?

Yes. We choose melamine, laminate or timber-veneer finishes to sit with your floor and existing cabinetry, and colour-match two-pac polyurethane to almost any shade, so the media wall belongs in the room rather than standing out. Handle profiles and shadowlines are matched to the rest of the home. Bring a flooring sample or photos to the measure and we will spec the finish against them.